Description: Classified
Function: Heavy Rifle Bipod
Weight: oprox 16oz
Cost: Classified
Description: Classified
Function: Not a bipod
Weight: Classified
Cost: Classified
The Atlas is the next generation of bipod. Take your rig to the next level with an Atlas V8.1 bipod.
The Locking version of our Accu-Shot monopod was introduced in January 2002 this has become our best seller for good reason. With the Steel on Steel threads, it has all the same great features as the BT01 with the addition of a second Thumbnut. By jamming this second Thumbnut one can remove all of the tolerance found between the Male/Female threads. Or with a bit more pressure "lock" the Actuator knob. This is the model to buy for the highest degree of accuracy from your rifle from the Bench or in the field.
Accu-Shot BT12 Quick Knob Approximate elevation range of 3.5 - 4.75"
Accu-Shot BT13 Quick Knob Approximate elevation range of 4.5 - 5.85"
The BT15 3.35" Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.30 to 2.25" with a relieved base to accommodate curved surfaces.
The BT17 - 4" 1913 Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT base to accommodate flat surfaces.
A standard sling stud can be used as one fastener or two Button head machine screws can be used (not included, see BT1517) to attach this rail to the forearm of standard rifle stocks.
The BT15 or BT17 can also be attached to a horizontal surface on the Butt section to attach our BR12 or BT13 Precision Rail Monopods. Both rails have a built in flush cup bushing for QD sling swivels.
BT29 Sako TRG Rail Kit - We are proud to introduce the new Sako TRG Rail Kit (TRGR pronounced “trigger” Kit) that comes complete and ready to install on your Sako TRG rifle butt stock allowing for the installation of our proven Accu-Shot BT12 Precision Rail Monopod (BT12-QK is shown but not included). Installation of the TRGR Kit DOES require the temporary removal of the butt pad assembly and a second hole to be drilled, all of which can be accomplished with common hand tools. The main components are constructed from 6061T6 having a black Mil-Spec type III Hard Anodized finish and is assembled using two 10-32 cold formed Flat Head Cap Screws, a 40 durometer rubber cushion is included.
Accuracy International – Freeland – Anschutz – Rail Kit - We are proud to introduce the new Patent Pending AFAR Kit, that will mount into theses accessory rails and provide a low profile 1913 Picitinny rail for attaching the BT10 or BT10-LW17 Atlas Bipod or other accessories to. This is a great option for shooters that have these accessory rails and want to use their Rail Mount Atlas on several rifles.
Three StocksThe BT28 AFAR Kit is ready to install, the uniquely dimensioned nuts will fit into the rails and slots one direction or rotated 90 degrees to another dimension. We suggest using some Loctite such as 243 when installing.The BT28 AFAR Kit is American made from 6061-T6 Aluminum with a Milspec Type III hard coat black with 4041 Alloy steel fasteners.
(The photo of the three stocks, from the top; Bell and Carlson, Sako TRG and Accuracy International is for demonstration only, the rails were prototypes in the “white” and rejected due to slot location. The slots are centered on the ones we are selling.)
WHILE WE REFERENCED WHAT WE BELIEVED TO BE A BONIFIED “ANSHUTZ” RAIL, WE HAVE HAD SOME CUSTOMERS WITH “ANSHUTZ” RAIL THAT THE AFAR RAIL NUTS DO NOT FIT. SO PLEASE USE THE DIMENSIONS BELOW FOR THE “AFAR” RAIL NUTS, TO INSURE PROPER FIT OF THESWE NUTS INTO THE SLOT OF YOUR ACCESSORY RAIL. THESE ARE STEEL AND CAN BE MODIFIED TO FIT BUT THAT DECISION TO DO SO WILL BE YOURS.
BT26 - FrontBT26 CAR Adaptor – We are proud to introduce the new Patent Pending CAR Adaptor that when installed on your CAR collapsible stock allows our BT12 or BT13 Precision Rail Monopod to be installed. This is a great option for shooters that want the LOP adjustments available with the collapsible stocks yet want the stability provided by the Accu-Shot Precision Rail Monopods.
The BT26 CAR Adaptor is ready to install, replacing the standard fixed loop on the stock while providing the means to re-attach the fixed sling loop with the loop on the left, right or bottom angled forward or back. The BT26 CAR Adaptor is made in America from alloy steel with a Manganese Phosphate finish
Replaces one of the four Socket Button Head Cap Screws found on the Magpul Precision Rifle Stock (PRS) with a sling stud. The threaded straps can be reversed giving 8 choices for stud placement. Each BT14 comes with a black polymer spacer.
Categories
