|
Borka Tools (Military Grade) torque driver kits:
MG3 AND MG5 KITS HAVE BEEN DISCONTINUED
Every Kit includes: MTD-15x72-12FS-MG (military grade) multi torque driver with
pre-set limiting torque values of 15,18,21,24,27,30,36,43,50,57,65,72 inch-lbs.
MG2 Base Kit includes:
1. MTD-15x72-12FS-MG
2. 2 7/8" long Autolock bit holder (primary driver spindle)
3. 1/4" hex (male) to 1/4" square (male) adapter
4. Durable and loackable polymer case by Rose Plastics
Total weight of MG2 kit is less than 6 ounces.
MG7 Field Kit includes:
1.MTD-15x72-12FS-MG
2. Autolock bit holder, 2 7/8" long, to be used as the torque driver spindle
3. Compact mini ratchet wrench
4. 1/2" hex socket with 1/4" square drive
5. 1/4" hex (male) to 1/4" square (male) adapter for use with 1/4" square drive sockets
6. 1/4" square (female) to 3/8" square (male) adapter for use with 3/8" square drive sockets
7. One piece 2" long hex bit extension
8. Customized 29 pcs. bits set in two organizers, which includes:
-Hex (Inch): 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16"
-Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm
-Slotted (blade width): 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16"
-Torx: T-10, T-15, T-20, T-25, T-27, T-30
-Philips: #1, #2
-Pozi: #1, #2
9. Custom 3/16" hex AICS action screws bit (for legacy AICS stocks with skins attached, also works for AX stocks with skins removed).
10. OD Green custom T.A.B. GEAR cordura carry pouch
Total weight of the MG7 kit is 16 ounces, approximate dimensions are 7" x 3" x 1.5".
MG9 Bench Kit includes:
1. MTD-15x72-12FS-MG
2. 2 7/8" long Autolock bit holder (primary driver spindle)
3. 2" long bit holder (extension for Autolock)
4. 1/4" hex (male) to 1/4" square (male) adapter
5. 1/4" square (female) to 3/8" square (male) adapter
6. Compact mini ratchet wrench
7. 1/2" hex socket with 1/4" square drive
8. Customized 29 pcs. hex bits set in two organizers, which includes:
-Hex (inch): 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16"
-Hex (metric): 2 mm, 2.5 mm, 3 mm, 4mm, 5 mm
-Torx: T-10, T-15, T-20, T-25, T27, T-30
-Flat (blade width): 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16"
-Philips: #1, #2
-Pozi: #1, #2
9. Custom 3/16" hex AICS action screws bit (not for use with AI AX unless skins are removed)
10. Heavy duty steel, tool case, 8 1/4" x 3 1/8" x 1 1/2", in red color.
Disclaimer: Borka custom AICS action screws bit has a bit body diameter of 0.245" and is designed to work with legacy AI stocks having trigger guard access hole diameter of at least 0.25". It will not work for AX stocks with side skins attached, and possibly, for some other models of current AI stocks, which were made after introduction of AX stock, due to the above mentioned access hole diameter being changed by Accuracy International to a smaller size.
Borka Tool Maintenance info:
http://www.borkatools.com/pages/atd12/pdf/PM%20procedure.pdf
|